EST-404A Wireless pinhole camera detector

Learn more about EST-404A Wireless pinhole camera detector

Description

Features

• Wireless pinhole camera detector scans all commonly used Video Frequencies in less than 5 seconds and detects the video transmission. Then the device locks in sources from up to 500 Feet away (depending on power of source transmitter)
• The device allows the user to see what the Hidden Camera is seeing, making it easier to detect hidden video. The monitor display is a high resolution 2.5 Color TFT Screen that displays the Video Image and the exact frequency of the transmission.
• This Wireless Camera Hunter is lightweight, portable, compact and perfect for counter surveillance applications.
• Our all new Wireless Camera detector quickly and easily finds single or multiple hidden wireless cameras and lets you see what they see.
• The 2.5" color TFT high resolution monitor displays the video image while the LCD window shows the exact frequency of transmission. Automatically scans all the commonly used video frequencies in less than 5 seconds and "locks-in" on any video camera transmitter and sounds an audible alert tone.
• Selectable antenna sensitivity allows "lock-in" on sources up to 500 of feet away (depending on power of source transmitter). 

Specifications: 

• Full Range Frequency Scanning from 900MHz ~ 2.52GHz
• 2.5" High Resolution Monitor
• LCD Display Shows Frequency and User Setting Details
• Full Range Video Protocol auto-switching for PAL / NTSC, CCIR / EIA
• Dual Power "AA" batteries or External AC adaptor (AC adaptor optional)
• Auto and Manual Scanning Modes
• "Fine Tuning" Rocker Switch for use after alert
• Battery life indicator on LCD
• Antenna Sensitivity Indicator on LCD
• Audible Alarm on/off Indicator on LCD
• video output allows you to plug into an external recording device.
• 3. 3. Sensitivity adjustment, if there is no outside interference signal please adjust the switch to the max (if the blue indicator is on, please adjust switch back till the blue indicator is off )
•    a. Make yourself to be the centre of the circle, hold the unit and go around the area by 360°. If the blue indicators are flash and not stable that'll be the noise signal instead the wireless signal from a emission source. We can ignore the flash.
•    b. When you put the earphone on, you may hear the sound somewhere (not the voltaic sound). That means there’s someone using the wireless earphone for the communication. Closer to the signal source, clearer the voice is.
•    c. Low power indicate:when the battery is below 2V, the low power red indicator is on which means the unit need to recharge.
• Make sure the direction of the signal.
• When there're two blue indicators are on and stable please keep the direction of the detecting antennas, and go straight to the direction. If 4 blue indicators on and stable, you can sure that the direction of the signal source is right.
• Make sure the position of the signal’s fountainhead.
• After making sure the direction of signal, you can shorten the detecting antenna and go straight to the signal‘s direction. When you already took back the antenna and the 4 blue indicators are still on, that's the accurate location of the signal.

8. Maintenance

9. Packing List

• Wireless detector main unit 1pc
• Earphone                    1pc
• Power adapter               1pc
• 3.7V lithium Battery        1pc
• User’s manual              1pc
• Leather case                1pc